Arcode MRL
Arcode MRL Slim
ARCODE MRL / ARCODE SLIM MRL Features
| Motor Control | Synchronous (gearless) Machine / Asynchronous (geared) Machine |
| Lift Speed (Maximum) | 4m/s |
| Number of Stops | 64 Durak |
| Automatic Floor Recovery | 1-phase 220VAC UPS battery group connection |
| Drive Type | Machine Room / Machine Roomless (MRL) |
| Group Work Capability | Up to 8 lifts |
| Serial Communication | With pre-installed CANbus serial communication (standard) |
| Encoder Type | Incremental (5V TTL or 10-30 HTL) / Absolute Encoders (EnDat, SSI, SinCos or BISS) |
AREM Handheld Terminal
- Easy to use with 320×240 TFT display
- Powerful visualisation to show even the smallest details
- Ability to control the system from any point on the CANbus
- Easy fault detection
- Fast and reliable updating of all units simultaneously with AREM
- Ability to work with all ARCODE systems
- Provides 3 levels of user access modes and restricted parameters (guest, maintainer, installation)
- SD card for easy upload, backup or transfer of system parameters for quick and easy installations
AREM Mobile
- Wireless ease of use and portability
- Parameter sharing via Whatsapp and email
- Powerful visualization to show even the smallest details
- Easy error detection
- Fast and reliable update of all units at once
- Ability to work with all ARCODE systems
- Provide 3 levels of user access modes and restrict parameters (guest, maintainer, installation)
- Thanks to the AREM MOBILE device, you can easily upload, backup and install system parameters from your mobile device via Bluetooth connection.
- Our Arem Mobile application is available on Google Play and soon on App Store.
ARKEL Arline
- Remote alarm system according to EN 81-28:2018 (+AC:2019) and EN 81-70:2018
- Immediate alarm and fault notification via SMS and e-mail
- Instant monitoring of elevator fault codes and alarm status via ARKEL Cloud
- EN 81-20 compliant intercom
- Automatic communication test and notification in case of failure Alarm filtering functions
- Simple connection with only 4 cables
- 5 programmable inputs and 2 relay outputs
- Directions to the building where the faulty elevator is located on mobile devices
- Built-in battery, battery charging, battery capacity monitoring and low battery notification
- Quick and easy setup via ARKEL Cloud web software
- Easy interfacing with ARCODE, ARL-700 and ARCUBE via CANbus
- Remote software update
- 2G network support
ARPASS
- Screenshot, no additional hardware needed
- Ability to use unused keys on CPC (or CPC-T) cards as password entry keys
- Building administrators can define/change/delete passwords using the buttons on the car operating panel
- Compatible with ARCODE
- Supports up to 24 floors
- Double door support
- Ability to set separate passwords for each floor
- Car operating panel restricts access to floors by entering a password before accepting the call
- Magnetic card access compatible with Wieagand 26-bit protocol
ARKEL Arlift
- Easy connection to ARCODE, ARL-700 and ARCUBE via serial port
- Directions to the building where the faulty elevator is located on mobile devices
- Instant monitoring of elevator fault codes and alarm status via ARKEL Cloud
- Instant alarm and fault notification via SMS and email
- With the elevator remote monitoring feature, authorized users can view live statistical information, elevator fault status, call status, floor lock status, car position and car speed.
- Remote fault detection, live monitoring of controller status screens
- Remote control via mobile phone and computer (floor call, emergency call, car locking, parking mode, door locking, etc.)
Generative Elevator Unit
- Compared to an elevator without a regenerative unit, it saves up to 35% of electricity consumption during travel.
- The energy generated is returned to the grid and reused.
- The generated energy is wasted by converting it into heat with braking resistance. The RGN-B06 saves this lost energy by returning it to the mains.